Parksense Sensors; Parksense Warning Display; Parksense Display - Jeep Compass2018 Owner's Manual

within the instrument cluster display indicating the vehicle
speed is too fast. The system will become active again
when the vehicle speed is decreased to speeds less than
approximately 6 mph (9 km/h).

ParkSense Sensors

The four ParkSense sensors, located in the rear fascia/
bumper, monitor the area behind the vehicle that is within
the sensors' field of view. The sensors can detect obstacles
from approximately 12 inches (30 cm) up to 79 inches (200
cm) from the rear fascia/bumper in the horizontal direc-
tion, depending on the location, type and orientation of the
obstacle.

ParkSense Warning Display

The ParkSense Warning screen will only be displayed if
"Sound and Display" is selected from the Customer -
Programmable Features section of the Uconnect System.
Refer to Uconnect Settings" in "Multimedia" for further
information.
The ParkSense Warning screen is located within the instru-
ment cluster display. It provides visual warnings to indi-
cate the distance between the rear fascia/bumper and the
detected obstacle. Refer to "Instrument Cluster Display" in
"Getting To Know Your Instrument Panel" for further
information.

ParkSense Display

When the vehicle is in REVERSE, the instrument cluster
display will show the park assist ready system status.
The system will indicate a detected obstacle by showing a
single arc in one or more regions based on the obstacle's
distance and location relative to the vehicle.
If an obstacle is detected in the center rear region, the
display will show a single solid arc in the center rear region
As the vehicle moves closer to the obstacle, the display will
show the single arc moving closer to the vehicle and the
audible chime increases as the objects gets close to the
vehicle.
STARTING AND OPERATING 261
6