Instrument Cluster Display Menu Items - Jeep Compass2018 Owner's Manual

108 GETTING TO KNOW YOUR INSTRUMENT PANEL
Models Equipped With Keyless Enter-N-Go — Ignition
Push Button Ignition
1. Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the ON/
RUN position (do not start the engine).
2. Fully push the accelerator pedal, slowly, three times
within ten seconds.
3. Cycle the ignition to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

Instrument Cluster Display Menu Items

NOTE: The instrument cluster display menu items display
in the center of the instrument cluster. Menu items may
vary depending on your vehicle features.
Speedometer
Push and release the up or down arrow button until the
Speedometer Menu item is displayed in the instrument
cluster display. Push and release the OK button to change
the speedometer scale from MPH to km/h (or vice versa).
Vehicle Info (Customer Information Features)
Push and release the up or down arrow button until the
Vehicle Info Menu item is displayed in the instrument
cluster display. Push and release the left or right arrow
button to cycle through the Vehicle Info submenus and
follow the prompts on each screen as needed.
1. Tire Pressure
• If tire pressure is OK for all tires a vehicle ICON is
displayed with tire pressure values in each corner of
the ICON.
• If one or more tires have low pressure, "Inflate Tire To
XX" is displayed with the vehicle ICON and the tire