Changing Lanesense Status; Parkview Rear Back Up Camera - If Equipped - Jeep Compass2018 Owner's Manual

Lane Approached (Flashing Yellow Thick Line, Solid
Yellow Thin Line/Flashing Yellow Telltale
NOTE: The LaneSense system operates with the similar
behavior for a right lane departure.

Changing LaneSense Status

The LaneSense system has settings to adjust the intensity of
the torque warning (Low/Medium/High) and the warn-
ing zone sensitivity (Early/Medium/Late) that you can
configure through the Uconnect system screen. Refer to
"Uconnect Settings" in "Multimedia" for further informa-
tion.
NOTE:
• The system will not apply torque to the steering wheel
whenever a safety system engages. (anti-lock brakes,
traction control system, electronic stability control, for-
ward collision warning, etc.).
• Use of the turn signals and Hazard Warning flashers also
suppresses the warnings.
PARKVIEW REAR BACK UP CAMERA — IF
EQUIPPED
Your vehicle may be equipped with the ParkView Rear
Back Up Camera that allows you to see an on-screen image
of the rear surroundings of your vehicle whenever the gear
)
selector is put into REVERSE. The image will be displayed
in the touchscreen display along with a caution note to
"check entire surroundings" across the top of the screen.
After five seconds this note will disappear. The ParkView
camera is located on the rear of the vehicle above the rear
license plate.
NOTE: The ParkView Rear Back Up Camera has program-
mable modes of operation that may be selected through the
Uconnect System. Refer to "Uconnect Settings" in "Multi-
media" for further information.
STARTING AND OPERATING 275
6