General Information; Fuse Location - Jeep Compass2018 Owner's Manual

Table of Contents

Advertisement

WARNING! (Continued)
• Before replacing a fuse, make sure that the ignition is
off and that all the other services are switched off
and/or disengaged.
• If the replaced fuse blows again, contact an autho-
rized dealer.
• If a general protection fuse for safety systems (air
bag system, braking system), power unit systems
(engine system, transmission system) or steering
system blows, contact an authorized dealer.

General Information

The fuses protect electrical systems against excessive cur-
rent.
When a device does not work, you must check the fuse
element inside the blade fuse for a break/melt.
Also, please be aware that when using power outlets for
extended periods of time with the engine off may result in
vehicle battery discharge.
Blade Fuses
1 — Fuse Element
2 — Blade Fuse with a good/functional fuse element.
3 — Blade fuse with a NOT functional / BAD fuse element (blown
fuse).

Fuse Location

The fuses are grouped into controllers located in the engine
compartment.
IN CASE OF EMERGENCY 317
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents