Table of Contents
Advertisement
Maintenance
Daily Maintenance
Before making any repairs or adjustments to the
machine, disconnect the power cord from the
electrical source.
Retirez le cordon d'alimentation de la machine de la
source électrique avant de procéder à des répara-
tions ou des ajustements de la machine.
At the end of each working day
1. Turn cloth filter bag inside out and brush clean. Do
not use a wire brush. Cloth bags can be vacuumed
with another machine or washed occasionally in
warm water using a mild, water-based soap
without harming filtering capacity. Allow to dry
completely before using.
2. Wipe down exterior of machine.
3. Check round foam filter at bottom of vacuum
chamber and clean if necessary. For best results,
replace the filter every 6 months
4. Inspect hose for wear. Frayed or cracked hoses
should be replaced to avoid vacuum loss.
5. Inspect power cord for wear. To prevent electric
shock, immediately replace cords with frayed or
cracked insulation.
18
Periodically inspect all hoses, electrical cables and
connections on your machine. Frayed or cracked hoses
should be repaired or replaced to eliminate vacuum
pressure loss. The electrical cable must be well
insulated. If the cable insulation is broken or frayed,
repair or replace immediately. Don't take chances with
electrical fire or shock.
86405760 ECO! T11 Bp LINER
Advertisement
Table of Contents
