Siemens SIMODRIVE 611 Configuration Manual page 4

Foreword
Target group of the Configuration Manual
The Configuration Manual addresses planners and design engineers. It supports you when
selecting motors, calculating the drive components, selecting the required accessories as
well as when selecting line and motor-side power options.
Technical Support
If you have any questions, please contact the following Hotline:
Phone:
Fax:
Internet:
Please send any questions about the documentation (e.g. suggestions for improvement,
corrections) to the following fax number or email address:
Fax:
Fax form:
E-mail:
Information on the products
Up-to-date information about our products can be found on the Internet at the following
address:
http://www.siemens.com/motioncontrol
iv
+49 (0) 180 5050–222
+49 (0) 180 5050–223
http://www.siemens.com/automation/support-request
+49 (0) 9131 98–63315
Refer to the correction sheet at the end of the document
mailto:motioncontrol.docu@siemens.com
Configuration Manual, (PJAL), 11.2005 Edition, 6SN1 197-0AD07-0BP4
General Section for Synchronous Motors