Table of Contents
Advertisement
28
Note
Display Connection
To connect menu monitor display outputs:
1.
Connect a customer-supplied SVGA monitor to the SVGA
connector, for all "local" menu display monitoring requirements
(in conjunction with the local alphanumeric keyboard).
2.
Connect a customer-supplied composite monitor to the Composite
connector, for remote menu display monitoring in the composite
format (as required by your system configuration).
3.
Connect a customer-supplied Y/C monitor to the Y/C connector,
for remote menu display monitoring in the Y/C format.
•
The SVGA connection is the preferred one for maximum
video quality.
•
The Composite and Y/C connections are less than ideal, and
should be used only when absolutely necessary. These outputs
are only available at resolutions less than 800 x 600.
Remote Control
The Lightning systems allow a variety of functions to be controlled exter-
nally from three different classes of controllers: the Lightning Shotbox, GPI
Triggers and RS-422 control via the Lightning Automation Protocol. This
section includes information on connecting these control options to your
Lightning 1000 system.
Lightning 1000 Installation Guide
Advertisement
Table of Contents
