Input Connection; Output Connection; Control And Network Connection - Pinnacle Systems Lightning 1000 Installation Manual

Input connection

To connect digital video inputs:
1. Connect CCIR-601 digital video sources to the A/Video Input
connector on all standard and optional channels in your system.
2. Connect CCIR-601 digital key sources to the B/Key Input connec-
tor on all standard and optional channels in your system.

Output Connection

To connect digital video outputs:
1. For all standard and optional channels in your system, connect the
Video Output connector to the desired destination input (typically,
a video monitor or a routing switcher).
2. For all standard and optional channels, connect the Key Output to
the desired destination input (typically, a routing switcher).
The user can redefine channel assignments via software. In this
Note
condition, note that your system's physical wiring and logical channel
assignments may not match.

Control and Network Connection

To connect control and network connections:
1. Connect the supplied mouse to the Mouse connector.
2. Connect the supplied alphanumeric keyboard to the Keyboard
connector.
3. Plug an RJ-45 connector (from a designated network transceiver)
into the Network port, to connect Lightning to your facility's PC
network. The network card accepts both 10-baseT and 100-baseT
connections. Refer to your Windows NT User's Guide for details
on configuring Lightning as a network node.
Lightning 1000 Installation Guide
27