Chassis Rear Panel Components - Pinnacle Systems Lightning 1000 Installation Manual

Chassis Rear Panel Components

The figure below illustrates the rear panel of the Lightning chassis (Serial
Digital version).
1 2
12 13
1) Captive Screws
2) Air Vents
3) Y/C Video Menu Output
4) Composite Video Menu Output 11) Digital Key Output
5) SVGA Menu Output
6) RS-422 Ports
7) Channel 3 I/O
1. Captive Screws. Two captive screws secure the Rear Connector
Panel to the chassis. Releasing them allows the hinged panel to
drop down.
2. Air Vents. Lightning's internal components and power supply are
cooled by multiple fans. Air flows through the front vents to the
internal fans, and out through these rear chassis exhaust vents. To
provide optimum air flow, do not obstruct the front and rear vents.
3. Y/C Video Menu Output. One Y/C connector is provided for the
menu output in Y/C video format. Use this connector (and a
customer-supplied Y/C monitor) when you wish to monitor the
user interface in Y/C format (typically at distances greater than five
meters from the chassis).
4. Composite Video Menu Output. One BNC connector is provided
for the menu output in composite video format. Use this connector
(and a customer-supplied composite monitor) when you wish to
Lightning 1000 Installation Guide
3 4 5 6
MENU OUTPUTS
Y/C
SVGA
VIDEO
COMPOSITE
MOUSE K/B SCSI
A / VIDEO
NETWORK
REF-LOOP
14 15 16 17 18
8) Channel 2 I/O
9) Digital Video Output
10) Channel 1 I/O
12) Rear Connector Panel
13) AC Power In
14) Mouse
7 8 9 10 11
DIGITAL I/O DIGITAL I/O DIGITAL I/O
OUTPUT OUTPUT OUTPUT
KEY VIDEO KEY VIDEO KEY
INPUT INPUT INPUT
B / KEY A / VIDEO B / KEY A / VIDEO B / KEY
19 20 21
15) Network
16) Keyboard
17) Not Used
18) Reference Loop
19) GPI Ports
20) A/Video Input
21) B/Key Input
13
1