Analog Out Screen - AJA KONA LHe Plus Installation And Operation Manual

Analog Out Screen

Figure 33. AJA Control Panel, Analog Out Screen
KONA 4/3G provides a high-quality analog component or composite + Y/C
output, generally used for monitoring. This screen shows the current settings for
that analog output, and allows you to re-configure it when desired (format and
black-level).
Select Analog Output
Select Primary or Secondary (any conversion applied) for the analog output; if a
conversion is applied, you'll see the conversion icon appear on the block diagram.
Format
Select the video format from the Format pulldown.
• Composite + Y/C
• Component (SMPTE)
• Component (Beta)
• Component (RGB)
NOTE: Component Video, or YPbPr, has been given several names over time. YUV, Y/R-
Audio Monitor
Here you select which two channels will be mapped to the analog audio stereo
output (headphone jack).
KONA Capture, Display, Convert v13.0
Y/B-Y, and YCbCr, are some examples. KONA uses the modern YPbPr terminology.
The three different types of YPbPr (SMPTE/EBU N10, Betacam [NTSC], Betacam
[NTSC Japan]) differ in level only.
52 www.aja.com