AJA KONA LHe Plus Installation And Operation Manual page 75

IP Input Screen In 4CH Mode
Figure 58. AJA Control Panel, IP Input Screen
The IP Input Screen on KONA IP lets you define parameters for receiving inputs to
the KONA IP from another device on the network.
NOTE: The IP 1 Input and IP 2 Input labels do not represent the physical SFP cages on the
Channel
Select the input channel to be configured.
Multicast
When selected, Multicast operation is used. Enter a valid multicast IP address into
the Dest IP Address field.
Unicast
When selected, Unicast operation is used. The Dest IP Address field is
automatically filled with that card's Local IP Address (from the IP Network screen)
and the field will be grayed out (not editable).
NOTE: Turning off Unicast operation makes the Dest IP Address editable, but it retains
Destination IP Addr
This filter lets you specify the network address where a multicast from another
device on the network can be found.
Destination Port
This filter lets you specify the port number being used to send a multicast to the
'Destination IP' address specified above.
KONA Capture, Display, Convert v13.0
KONA IP. They represent different transmissions being received by the KONA IP
card, possibly over the same 10GbE link.
the previously applied Unicast IP address. You must edit the Dest IP Address field
on this screen to resume Multicast operation.
75 www.aja.com