AJA KONA LHe Plus Installation And Operation Manual page 68

Figure 50. Control Screen with 4K 2 Link Input and Output
4K Controlled Mode
Alternatively, if you launch an appropriate control application (such as AJA
Control Room), the SDI input and output ports will be mapped automatically.
If you connect a UltraHD or 4K input signal higher than 30 fps, all four BNCs are
required for SDI input or output. You can use the HDMI output to monitor an
input signal.
Figure 51. Control Screen with a Controlling Application
KONA Capture, Display, Convert v13.0 68 www.aja.com