box. The x4 BNC cable to 1.0/2.3 connectors cable that shipped with the card is
needed to connect the SDI connectors out of the card to the breakout box. Also,
the HDMI cable connects between the KONA 4/3G card and the box rear panel.
Figure 7. Shipping Box Contents, (KONA 3G contents shown)
The KONA LHi and LHe Plus cards use the breakout cable providing XLR balanced
audio connectors, an RS-422 9-pin connector, and BNCs for video I/O and
reference connection (see
Figure 1 on page
13).
As you unpack your shipment, carefully examine the contents. Ensure you
received everything and that nothing was damaged during shipping. If you find
any damage, immediately notify the shipping service and supply them with a
complete description of the damage. AJA will repair or replace damaged items.
If you find shipping damage, contact your AJA dealer or distributor for details on
how to have your KONA card repaired or replaced.
NOTE: Save packing materials and the shipping box. If you ever require service or move
your system use the packaging materials and box for safe shipment.
KONA Capture, Display, Convert v13.0
22
www.aja.com