Assembling The Camera Module And Recording Module; Assembling Modules - Panasonic VARICAM HS Operating Manual

Assembling modules

Assembling the camera module and recording module

1
Align the upper lock angle in front of the recording module with the upper lock plate at the rear of the camera module. (Fig. 1)
2
Firmly push in the recording module and connect the connection terminals of the camera module and recording module. (Fig. 2)
@
NOTE
t
t
Disassembling
1
Push down the recording module release lever (Fig. 2) while pulling up the lock knob (red) of the recording module release lever
(Fig. 1).
2
Lift the recording module.
3
Remove the upper lock angle in front of the recording module from the upper lock plate at the rear of the camera module.
Chapter 3 Preparation — Assembling modules
Fig. 1
Fig. 3
Fig. 1
– 22 –
Fig. 2
Fig. 4
Fig. 2