Mounting and adjusting the lens
Mounting the lens
Lens lever
Mount cap
Fig. 1
Fig. 3
1
Raise the lens lever and remove the mount cap. (Fig. 1)
2
Align the indentation at the top center of the lens mount with the center mark of the lens to mount the lens. (Fig. 2)
3
Lower the lens lever to firmly clamp the lens. (Fig. 3)
4
5
@
NOTE
t
t
Flange lens back adjustment
@
NOTE
t
Chapter 3 Preparation — Mounting and adjusting the lens
– 29 –
Mark
Fig. 2
Cable clamp
<LENS> terminal
Fig. 4