Table of Contents
Advertisement
1
Attach the slider unit to the viewfinder mounting holes on top of the camera module using the two supplied screws. (Fig. 1)
2
Slide the viewfinder plate from above into the slider unit. (Fig. 2)
3
Push down the lock lever backwards to lock.
4
Connect the supplied connecting cable to the viewfinder connection terminal and the camera module's <VF> terminal.
Disassembling
a: Stopper
1
Remove the connecting cable.
2
Push down the lock lever towards the front to release the lock.
3
Lift the viewfinder while pulling the stopper.
4
Remove the slider unit clamping screw.
Chapter 3 Preparation — Assembling modules
Fig. 1
a
– 23 –
Lock
Release
Fig. 2
Advertisement
Table of Contents
