Table of Contents
Advertisement
Inspections before shooting
1
Confirm that the assembled modules and the handles are fixed securely.
2
Mount the lens and adequately charged battery.
3
Insert an expressP2 memory card or P2 memory card into the main slot, and close the slot cover.
4
Set the <POWER> switch to <ON>.
5
Check the remaining battery level with the status display on the control panel.
6
Check the media free space with the status display on the control panel.
7
Press the <REC> button and check the following.
f
f
f
8
Press the <REC> button again.
9
Press the <PLAY> button to switch to the PLAY screen, and play back the clip you just recorded.
Chapter 12 Maintenance and Inspection — Inspections before shooting
Advertisement
Table of Contents
