Unpacking And Putting Away The System (Large Case) - GE Mentor Visual iQ User Manual

Unpacking and Putting Away the System (Large Case)

Caution: If you do not pack the system carefully, as described here, damage might occur.
1
– Remove tray to access additional storage space.
2
– The insertion tube (shown in red for clarity) is held in the case's internal storage reel, which is accessed through the orange funnel shown here. Install the insertion tube before
installing the probe-and-handset assembly and remove it after removing the probe-and-handset assembly. Be sure to straighten any loops or twists in the insertion tube before
feeding it into the funnel.
07/30/2014
Caution: Before storing the insertion
tube, first remove the optical tip and install the
head guard, which prevents damage to the tip
attachment mechanism. Keep the head guard on
whenever no optical tip is in place.
3
– Storage locations for two batteries. Battery must
be removed prior to installing the iQ in the case.
4
– Rigidizer
5
– Mounting bracket and post
6
– Mounting bracket post fits in this hole
7
– Power supply / Battery Charger installed in this
slot
8
– Extra Pod in case
9
– Extra VideoProbe in case
10
– Two cases holding tips and a cleaning kit fit
in these slots.
11
– Gripper may be used alone, or with Rigidizer,
to aid in orienting camera.
13