Viewing Reference Material; Stopping And Resuming An Inspection - GE Mentor Visual iQ User Manual

60

Viewing Reference Material

1
– Select at any level within the inspection to access Reference Material associated
with the level or point
2
– Select any PDF, image, or video material to open and view on the Visual iQ display
3
– Select Show All to access all Reference Material associated with the active
inspection, which may be more than the material associated with the active level.
4
– Select to Copy and paste all reference material for the active inspection into the
folder identified at the beginning of the inspection for storage of results.

Stopping and Resuming an Inspection

To stop an inspection, which may be resumed or finished at a later time, access the MDI
Leaf Menu by selecting the soft key bearing the inspection's name and select Stop. To
resume a previously stopped inspection, select the MDI soft key, then choose to either
Resume the Last inspection or browse for a previous inspection to Resume.
07/30/2014