Working With Profiles - GE Mentor Visual iQ User Manual

18
Working with Profiles
A Profile defines several parameter settings. As long as more than one profile is available,
(the Visual iQ is delivered with only a Default Profile), the operator is asked to select a
Profile every time the system is powered on. Follow these instructions to create a new
profile or select an existing one.
1
– To create a New Profile, touch the lower left corner of the display (or press the
hard key) to open the Global Menu, then select Profiles.
2
– In this case, the Default Profile is active and it is the only one defined. Select New
to create a new profile.
3
– The Virtual Keyboard opens. Enter a Name for the new profile.
4
– After entering a name and clicking Done, the new profile is added to the list of available
profiles. This profile includes the settings in place, at the time of its creation, for each of
the parameters listed below. Anytime the profile is reactivated, the system will apply the
settings associated with the activated profile. The parameters affected include:
System Settings Including:
Watermark Logo ON/OFF
Time Format
Date Format
Language
Power Management
USB Slave Mode
Steering Sensitivity
Screen & Display Settings – All Parameters
Connectivity Settings Including:
Wi-Fi on/off
Bluetooth on/off
5
– Each time the Visual iQ is powered on, you'll be asked to select from the list of
available profiles. Selecting the Default Profile returns the settings for all profile-controlled
parameters to those specified by the default profile.
Image & Video Settings – All parameters
except Distortion Correction Table
Measurement & Annotation Including:
Presets
Zoom Window
3DPM Mask
3DPM Save Format
Stereo Index
Stereo Index Minimum
Units
07/30/2014