GE Mentor Visual iQ User Manual page 7

Battery Warnings
Only use the battery and power supply specified for use with the system. Before use, thoroughly review the instructions in this manual for the battery and battery charger to
fully understand the information contained in them, and observe the instructions during use.
WARNING
• Do not place the battery in fire or exceed the battery operating temperature.
• Do not pierce the battery with nails, strike the battery with a hammer, step on the battery, or otherwise subject it to strong impacts or shocks.
• Do not expose the battery to water or salt water, or allow the battery to get wet (IP55 – Disassembled, IP67 – Assembled).
• Do not disassemble or modify the battery.
• The instrument contains a Lithium Ion battery and magnesium in its case. Should the instrument be involved in a fire, use an extinguisher approved for use on electrical and
flammable metal fires. Water must not be used.
Battery Communication Error: Exists when the Visual iQ shows this message on the display. If the problem persists, please contact your nearest customer support
center.
Using the battery outside its recommended operating range will result in degradation of the performance and service life. When storing the battery, be sure to remove it from
the handset.
Recommended ambient temperature range for Li-ion battery operation:
Discharge (when using the instrument): -20°C to 46°C
Recharging: 0°C to 40°C
Storage: -25°C to +60°C
07/30/2014
7