Working With Preset Image Transformation Settings - GE Mentor Visual iQ User Manual

34
Working with Preset Image Transformation
Settings
Values assigned to the image transformation settings can be saved as a user-named
Preset. When recalled, all transformation settings will revert to the values assigned when
the Preset was created. Each user-named Preset appears as a soft key in the Image
Menu. To load a Preset, simply select its soft key or press the corresponding button.
1
– Tap the on-screen Image button or press the corresponding key to display
the Image Menu, which contains the eight image transformation settings.
Adjust settings as needed.
2
– To save the image transformation settings in a user-named Preset, select Save to
Preset. The Preset List will open.
3
– Tap to select any one of the five Presets. The virtual keyboard will open, allowing
you to name the Preset.
4
– After entering a name for the Preset, select Done.
5
– The user-named Presets appear as soft keys in the Image Menu. Select any of these
to load the settings stored in the corresponding Preset.
6
– Tap here to toggle between the upper and lower Soft Key Bars.
Note: Presets are stored only for the profile that is logged in at the time they are created.
07/30/2014