Table of Contents
Advertisement
Appendix C: Service
WARNING. To avoid personal injury or damage to the unit, be sure that
the power is not supplied to the television demodulator while
performing the procedures in this section.
This section contains instructions for user service and preventative
maintenance. The only serviceable part is the fuse, which is available
on the rear panel.
There are no user serviceable parts within the unit. Please return it to a
Tektronix Service Center for service and calibration.
Packaging for Shipment
If it becomes necessary to ship the television demodulator to a
Tektronix Service Center, follow these instructions:
1. Write the following on a tag attached to the product: the product
owner, complete address and phone number of someone at your
firm who can be contacted, the product serial number, and a
description of the required service.
2. Package the product in the original packaging materials. If they are
not available, follow these directions:
a. Obtain a carton of corrugated cardboard having inside
dimensions at least 6 in (150 mm) greater than the
dimensions of the instrument.
b. Surround the product with a protective bag (anti-static
preferred).
c. Pack dunnage or urethane foam between the product and
the carton. If you use Styrofoam kernels, overfill the box
and compress by closing the lid. There should be
3 inches (75 mm) of tightly packed cushioning on all sides
of the instrument.
3. Seal the carton with shipping tape, an industrial stapler, or both.
DS1000 Series User Manual
C–1
Advertisement
Table of Contents
