TUNING
Sets or requests the tuning mode. The tuning mode can be by channel,
frequency, or from a programmed (preset) setting. The television
demodulator must be in the remote state to use this command.
Syntax
TUNING=<tune_mode>
TUNING?
Arguments
<tune_mode> may be set to any of three modes:
H 0, Channel tuning, allows tuning by channel number.
H 3, Frequency tuning, allows tuning by frequency in network
standard increments.
H 4, Programmed tuning, allows tuning by loading a stored preset.
Examples
Command
`TUNING?'
DS1000 Series User Manual
Result
4: Returned data of [4] means television demodulator is in
program (preset) mode.
Appendix B: Remote Control
B–29