Table of Contents
Advertisement
Reference
Table 3–1: Configure menu hierarchy (cont.)
Configure
menu
2
Frequency
Response
3
Contrast
Adjust
4
User Channel
Table
5
Serial Set-up
Quick Guide
To configure the television demodulator, follow these procedures:
1. Press the front panel CONFIG button to access the Configuration
menu.
2. Use the up and down buttons ( and ) to select a configuration
mode.
3. Press the enter button ( ) to enter the selected configuration mode.
3–2
Selections
Range
Audio Preference
NTSC: BTSC
PAL: NICAM, FM
Audio Input Select
NTSC: Mono, Mono-SAP, Stereo, SAP
PAL: Mono1, Mono2, Mono1-Mono2, Stereo
AFC Status
On, Off
Sound Trap
On, Off
Stereo Noise
NTSC: 1–16
SAP Noise
NTSC: 1–16
Manual Frequency
–10 to +10
Response Adjust
Display Contrast
Dark to Max brightness
Adjust
Channel (1–50)
NTSC: 55.25 to 801.25 MHz
PAL: 45.25 to 860.25 MHz
Serial Mode
RS232, RS485
Unit Address
32 to 63
RTS/CTS
Disabled, Enabled
RS485 Termination Unterminated, Terminated
DS1000 Series User Manual
Advertisement
Table of Contents
