Btsc - Tektronix DS1001 User Manual

Appendix B: Remote Control

BTSC

Sets or requests the stereo and SAP noise threshold for the BTSC
controller. The television demodulator must be in the remote state to
use this command.
Syntax
BTSC= <stnt_val><sapnt_val>
BTSC?
Arguments
Byte
Argument
offset
1 <stnt_val>
2 <sapnt_val>
Examples
Command
`BTSC=` 10 7
B–16
Format Description
byte Sets the stereo noise threshold in the
BTSC controller. Range is 0 to 15.
byte Sets the SAP noise threshold in the
BTSC controller. Range is 0 to 15
Result
BTSC stereo noise threshold set to level 10.
BTSC SAP noise threshold set to level 7.
DS1000 Series User Manual