Table of Contents
Advertisement
CHANNEL
Sets or requests the selected channel record number and frequency
table of the television demodulator. Sending the CHANNEL=
command automatically sets the tuning mode to CHANNEL. The
television demodulator must be in the remote state to use this
command. For the query command, set TUNING to mode 0.
Syntax
CHANNEL=<table><channel_rec>
CHANNEL?
Arguments
Byte
Argu-
offset
ment
1
<table>
2
<chan-
nel_rec>
DS1000 Series User Manual
Appendix B: Remote Control
Description
Selects the table of channels from one of the following:
NTSC:
0:
User defined table
1: CATV HRC
2: CATV IRC
3: CATV STD
4: STDOFST
5: IRC
6: HRC
7: B'CAST
Selects the record number in the selected table. The
table record number corresponds to a particular channel
number. Refer to Appendix D for the record number
associated with each channel number in the selected
table.
PAL:
0:
User defined table
1: UHF EUROPA
2: UHF CHINA
3: VHF EUROPA
4: VHF FRANCE
5: VHF ITALY
6: VHF AUSTRALIA
7: VHF CHINA
8: VHF IRELAND
9: VHF N. ZEALAND
10: VHF S. AFRICA
11: VHF OIRT
12: VHF CCIR
B–17
Advertisement
Table of Contents
