Disc - Tektronix DS1001 User Manual

Appendix B: Remote Control
Examples
Command
`CHANNEL=`1 18 NTSC:

DISC

Puts the television demodulator in the local state, which enables the
front panel controls and clears the remote flag. Use the command
PWD to enter the remote state and set the remote flag.
Syntax
DISC=
Arguments
none
B–18
Result
Table 1, CATV HRC frequency table is selected.
Channel record 18 selected = channel number 19
PAL:
UHF EUROPA frequency table selected.
Channel record 18 selected = channel number 39
DS1000 Series User Manual