Table of Contents
Advertisement
Reference
This section describes how to configure the television demodulator to
fit your application.
Configuring Operation
The television demodulator has many configurable parameters which
it stores in non-volatile memory. Use the Configuration menu to select
items. Table 3–1 lists the configurable items in the sequence that they
appear.
Changes to program items immediately change the operation of the
television demodulator. This active control allows you to see the
affects of a change without exiting the program configuration mode. If
selected changes do not give the desired result, you can discard the
changes by exiting the configuration mode using the 'NO' save
option.
Refer to Appendix E for a list of factory default settings for all
configurable items.
Table 3–1: Configure menu hierarchy
Configure
menu
1
Program
DS1000 Series User Manual
Selections
Range
Frequency Table
UHF, VHF, user defined
Channel
Various
Frequency
NTSC: 55.25 to 801.25 MHz
PAL: 45.25 to 860.25 MHz
ZCP Status
On, Off
ZCP Line Number
NTSC: 10-20 (F1 & F2)
PAL: 6-16, 319-329
ZCP Position
0 to 4
3–1
Advertisement
Table of Contents
