Figure 3-4 Remove The Paper; Figure 3-5 Front Locking Bar; Figure 3-6 Push Release Bar - FutureLogic PSA-66-ST2NU Operator's Manual

4. Remove the paper from the printer.
5. Push the Front Locking Bar unit to unlock the sliding module from stationary module.
Slide the drawer module completely out of the stationary module.
6. Push the Release Bar (located on the bottom of the unit).
While holding in the Release Bar, gently pull the printer towards you.
© 2006 – 2007 FutureLogic, Incorporated. All Rights Reserved.
Figure 3-4 Remove the Paper
Figure 3-5 Front Locking Bar
Figure 3-6 Push Release Bar
Operators and Technicians Manual
Front
Locking
Bar
MNL Page 10 of 29 12/06/2007
MNL-000030 REV.X07