Clearing A Paper Jam; Figure 2-4 Sample Configuration Ticket; Figure 2-5 Remove The Paper - FutureLogic PSA-66-ST2NU Operator's Manual

Model number
System
communications
setup
Print Control Parameters
Listing of stored
Templates, Print
Regions and Graphics

Clearing a Paper Jam

The printer is designed to operate reliably with minimal paper jamming. If you need to clear a paper
jam, follow the instructions below. After you clear a paper jam, perform these steps in reverse to
load paper.
When clearing a paper jam:
•
Ensure that all paper paths from the entry point at the back of the paper well, through the
printer, cutter, and the ticket module chute are clear of paper or obstructions.
•
Use the Lid Release Lever located on the top of the unit.
•
Do not allow a screwdriver or other probing object to come in contact with the printer. This can
cause permanent damage to the printer.
To clear a paper jam:
1. Remove the paper from the printer.
© 2006 – 2007 FutureLogic, Incorporated. All Rights Reserved.
Model:
Firmware:
COMMUNICATION
Interface:
PRINT CONTROL
Darkness Control:
Black Bar Index:
Print On Demand:
Auto Sleep Timer:
SYSTEM RESOURCES
FLASH -Used:
-Free:
LIBRARY INVENTORY
Templates:
Print Regions:
Graphics:
Fonts:
Figure 2-4 Sample Configuration Ticket
Figure 2-5
PSA-66 USB REV A
GUU0010432 2006-05-17
USB 2.0 Full Speed
+0.0
Enabled
Disabled
Off
000000
065536
0,1,2,3,4,5,6,7,8,9,A,B,z,x
1,2,3,4,5,6,7,8,h,9,A,B,
C,D,E,F,G,I,J,K,L,N,O,P,
Q,R,S,T,U,Z,X,a,b,c,d,e,
f,g,i,j,k,l,m,n,o,p,q,z,x
1,2,3,4,5,7,8,9
Remove the Paper
Operators and Technicians Manual
Resident ticket template
package version
Firmware version
Amount of memory
available for user-defined
font and graphics storage is
indicated by the "Free"
space.
List of fonts available
in the printer by TCL
page mode
MNL Page 6 of 29 12/06/2007
MNL-000030 REV.X07