Graco ProMix 2KE Operation page 17

11. Screw the static mixer (SM) into the injection cap
(M*). Install the retained fitting (F) on the static mixer
tube and secure with the nut (N1).
* These parts are included in the
15U955 Injection Kit.
H
S
SM
N1
F
F . 8. Install 15U955 Injection Kit
IG
12. Follow instructions under Fluid Connections on
page 14.
NOTE: Use a minimum 20 ft (6.1 m) x 1/4 in. (6 mm) ID
gun fluid supply hose when using dynamic dosing. If the
material is harder to integrate, use a longer hose.
13. Tune the fluid pressure and flow.
3A0869C
J
L1*
K
R*
L2*
L1*
M*
ti16335a
Installation
17