Intrinsically Safe Installation Requirements - Graco ProMix 2KE Operation

Installation

Intrinsically Safe Installation Requirements

Do not substitute or modify system components as
this may impair intrinsic safety. For installation,
maintenance, or operation instructions, read
instruction manuals. Do not install equipment
approved only for non-hazardous location in a
hazardous location. See the identification label for
the intrinsic safety rating for your model.
10' CAN CABLE
50' OPTION
2' CAN CABLE
ALTERNATOR
MODULE
20" CAN CABLE
F . 1. Hazardous Location Installation
IG
10
Hazardous (Classified) Locations
Class 1, Div 1, Group D, T3 (US and Canada)
Class 1, Zone 1, Group IIA, T3 (ATEX only)
USB MODULE
FLUID
CONTROL
MODULE
1. The installation must meet the requirements of the
National Electric Code, NFPA 70, Article 504 Resp.,
Article 505, and ANSI/ISA 12.06.01.
2. Multiple earthing of components is allowed only if
high integrity equipotential system realized between
the points of bonding.
3. For ATEX, install per EN 60079-14 and applicable
local and national codes.
CABLE ASSEMBLY
CABLE ASSEMBLY
USER INTERFACE
MODULE
FLOW FLOW
METER A METER B
G3000
G3000
G3000HR
G3000HR
S3000
S3000
3A0869C