Display Module; Display - Graco ProMix 2KE Operation

Display Module

LCD Display
Ratio
Potlife timers
Soft keys
Navigation Keys
Standby Key
F . 13. Display Module
IG

Display

Shows graphical and text information related to setup
and spray operations. The screen backlight is factory set
to remain on. The user may set a number of minutes the
screen can be inactive before the backlight dims. See
Configure 3 (Screen 20), page 43. Press any key to
restore.
NOTE: The Display Module and bracket can be
removed from the cover of the electrical box and
mounted remotely, if preferred.
Key Function
Setup: Press to enter or exit
Setup mode.
Enter: Press to choose a field to
update, to make a selection, or
to save a selection or value.
Left/Right Arrows: Use to move
from screen to screen.
Up/Down Arrows: Use to move
among fields on a screen, items
on a dropdown menu, or digits
in a settable field.
3A0869C
Screen number
Error code
Potlife state
ti16319a
Setup Key
Keys are used to input numerical data, enter setup
screens, navigate within a screen, scroll through
screens, and select setup values.
NOTICE
To prevent damage to the soft key buttons, do not
press the buttons with sharp objects such as pens,
plastic cards, or fingernails.
Error Reset: Use to clear alarm
so cause can be fixed. Also use
to cancel a data entry field.
Standby: Stops the current
operation and puts the system
into standby.
Soft keys: Press to select the
specific screen or operation
shown on the display directly
above each key.
Display Module
Active recipe
Operation mode; see
page 24 for key
Navigation keys
Flow rate
Enter key
Error Reset
Key
23