c.
Swing the top edge of the display panel (1) up and forward until the display panel rests upside
down in front of the display back cover.
d.
Release the adhesive support strip (2) that secures the display panel cable connector to the
display panel.
e.
Disconnect the display panel cable (3) from the display panel.
f.
Remove the display panel.
The display panel is available using the following spare part numbers:
●
847651-003 – 15.6-in, FHD, BrightView (1920×1080), WLED, UWVA, TouchScreen
809612-014 – 15.6-in, HD, BrightView (1366×768), WLED, SVA, TouchScreen
●
●
842463-008 – 15.6-in, FHD, BrightView (1920×1080), WLED, UWVA, non-TouchScreen
752920-015 – 15.6-in, FHD, AntiGlare (1920×1080), WLED, UWVA, non-TouchScreen
●
●
798933-012 – 15.6-in, FHD, AntiGlare (1920×1080), WLED, SVA, non-TouchScreen
847654-008 – 15.6-in, HD, BrightView (1366×768), WLED, SVA, non-TouchScreen
●
●
909185-006 – 15.6-in, HD, AntiGlare (1366×768), WLED, SVA, non-TouchScreen
12.
If it is necessary to replace the display hinges:
a.
Remove the display bezel.
b.
Remove the two Phillips PM2.0×2.9 screws (1) that secure the hinges to the display back cover.
c.
Remove the six Phillips PM2.5×3.2 broad head screws (2) that secure the hinges to the display
back cover.
Component replacement procedures
61