HP 15-cc000 Maintenance And Service Manual page 59

Description
Equipped with an Intel Core i3-7100U 2.40-GHz dual core processor (2133-MHz FSB, 3.0-GB L3 cache,
15-W), an Intel HD Graphics 620 graphics subsystem with UMA video memory, and a non-Windows
operating system
Equipped with an Intel Pentium 4415U 2.30-GHz dual core processor (2133-MHz FSB, 2.0-GB L3 cache,
15-W), an Intel HD Graphics 610 graphics subsystem with UMA video memory, and the Windows 10
operating system
Equipped with an Intel Pentium 4415U 2.30-GHz dual core processor (2133-MHz FSB, 2.0-GB L3 cache,
15-W), an Intel HD Graphics 610 graphics subsystem with UMA video memory, and a non-Windows
operating system
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the optical drive (see
a. Bottom cover (see
b. Battery (see Battery on page
c. Hard drive (see
d. Solid-state drive (see
e. Fan (see Fan on page
When replacing the system board, be sure to remove the following components from the defective system
board and install them on the replacement system board:
● WLAN module (see
Memory module (see
●
● Heat sink (see Heat sink on page
USB port board cable (see
●
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Power connector cable
(2) WLAN antenna cables
NOTE: The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/
black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal.
(3) Display panel ZIF connector cable
(4) Speaker cable
(5) TouchPad ZIF connector cable
Optical drive on page
Bottom cover on page
38)
Hard drive on page 39)
Solid-state drive on page
49)
WLAN module on page 41)
Memory module on page
54)
USB port board cable on page
35), and then remove the following components:
36)
43)
44)
57)
Component replacement procedures
Spare part number
926276-001
926277-601
926277-001
51