Hayward Sense and Dispense Installation And Operation Manual page 17

Side mounting Sense and Dispense™ to the AquaRite Pro: Use the four mounting holes on
the back of the bracket when surfacing mounting. After installation, coil excess cable in the
AquaRite Pro enclosure. Refer to the diagram below.
Use remote mounting
holes when surface
mounting.
Remote surface mounting the Sense and Dispense™: The Probe Cell can be mounted up to
4,4 m away from the AquaRite Pro (limited by length of cable). Use the four mounting holes
on the back of the bracket when surfacing mounting. Common wood screws can be used for
most applications.
Sense and Dispense™ to AquaRite Pro
Route probe cell cable
through access hole
BEFORE mounting
Side Mounting
Zip Tie and store extra
cable length here
Use remote
mounting holes
when surface mounting.
3