Omega Clamps - Tempest Tornado Marine G4 User Manual

Omega Clamps

Most luminaires come with omega clamps of some kind,
and this is the easiest mounting method.
1. Simply bolt the omega clamp to the two luminaire
mounting bars. Note: This will probably work best in
one of the LOW positions (shown here), due to the
height of the omega brackets.
2. Check that the luminaire is centered and that the
ends of the mounting bars are parallel.
NOTE: In some cases, you may need to add a nut under the
omega clamp, to clear the omega handle.
NOTE: This mounting method may not provide maximum
rigidity. Some luminaires might be unsteady when stopping
at the end of rapid moves.
Example – Clay Paky Super Sharpy/Mythos.
1. Bolt the center hole of the mounting bar (wide side)
to the center hole of the omega clamp, using the M10
bolts provided. Using this side of the mounting bar
ensures that the height of the omega clamps will not
raise the luminaire too high in the enclosure.
2. Secure the omega clamp to the luminaire base using
the two quarter-turn fasteners provided.
Tornado G4 User Manual 36