Remote Monitoring Connections - Tempest Tornado Marine G4 User Manual

Remote Monitoring Connections

Tempest G4 enclosures optionally support four types of
remote monitoring:
1. Direct via Ethernet, using Tempest TEMP
protocol (see Appendix – TEMP Protocol)
Requires 51.EN Ethernet board
2. Grouped via RS485, using an Ethernet bridge and
Tempest TEMP protocol (see Appendix – TEMP
Protocol)
Requires one 51.485 RS485 board per enclosure
and one 51.EN Ethernet board per bridge
3. Grouped via RS485, using DMX/RDM – see next
page
Requires one 51.485 RS485 board per enclosure,
and one JESE RDM-TRI Interface
Tornado G4 User Manual 19