Drainage - Tempest Tornado Marine G4 User Manual

Drainage

For base up/globe down or horizontal operation, a small drainage hole should be drilled in the globe, to permit any water
draining through the enclosure to exit harmlessly.
Note: this is not required in sheltered installations, such as under an overhang or canopy.
YOU MUST USE THE APPROPRIATE TAPERED DRILL BIT.
A tapered drill bit is included with the printed manual packet in each Tornado shipment.
Replacements are available from Tempest free of charge.
A standard drill bit may crack the plexiglass globe. Tempest Lighting will not be responsible for such damage.
Horizontal Enclosures – be sure to replace the globe with the drainage hole at the lowest point after relamping.
Tornado G4 User Manual 12