Programming Your Drone Settings - YUNEEC Breeze 4k Quick Start Manual

Tap [ ] and select Drone Settings, and then swipe
the screen to "Compass Calibration". Follow the
on-screen animations to complete the calibration.
The LED indicator blinks white or yellow during the
whole compass calibration process, when you complete
the process, the LED will blink green and Breeze will emit
an audible sound. Recalibrate the compass if the LED
blinks red as this means calibration has failed.

11. PROGRAMMING YOUR DRONE SETTINGS

Tap[ ] on the main interface and select [
you can set the default height after take off, name the
drone, set flight boundaries, complete compass calibration
and enable/disable liability disclaimer.
Nor th
Entered into Compass Calibration
During the Whole Calibration Process
Succeeded
Failed
1.5m ( 5ft )
Drone Settings
],