Removing The Lens Cover; Installing The Flight Battery; Powering On/Off Breeze - YUNEEC Breeze 4k Quick Start Manual

5. REMOVING THE LENS COVER

6. INSTALLING THE FLIGHT BATTERY

Slide in the fully charged battery until it locks.
Remove the battery by pressing the locking tab
and sliding the battery to the rear of Breeze .

7. POWERING ON/OFF BREEZE

POWER ON: To start your Breeze , press and hold
the power button at the rear of Breeze.
When Breeze is on, the LED indicator will blink
blue-red-green four times and emit a sound. When
the LED indicator blinks blue rapidly, Breeze will
enter "bind" mode.
Breeze is on (emits a sound)
Bind mode