Lorex LW1741 User Manual page 11

4 Installing the Camera(s)
Wall
To install the camera(s):
1. Use the included mounting screws to attach the camera stand(s) to the mounting
surface:
• Mark the positions of the screw holes on the mounting surface with the base of the
mounting stand.
• Drill holes and insert the drywall plugs (included) as needed.
• Firmly attach the camera(s) to the mounting surface using the included screws.
Note
If you run the power cable through the mounting surface, connect power before attaching the camera
to the wall.
2. Attach the camera stand(s) to the camera(s).
#LX400030; r.16602/16610; en-US
Counter
7