Navigating Menu Screen - Lorex LW1741 User Manual

8 Using the System
01
6
1. Channel indicator: Displays the camera you are presently viewing. If viewing multiple
cameras at once, the camera indicator will appear above each video display.
2. Viewing mode indicator: Indicates the viewing mode by showing a different icon for
Single Channel Viewing (
Viewing ( ) modes.
3. Zoom indicator: Indicates that the current live view is zoomed in to twice the original
size.
4. Signal indicator: The signal indicator shows the strength of the signal being received
from the camera. The number of bars in the Signal Indicator shows the strength of the
signal. One, or no bars indicates the signal is poor, and 4 bars indicate a very strong
signal.
Note
• If the signal is low (for example, 1 or 2 bars) adjust the antennas, or reposition the camera(s) or
receiver for best performance.
5. Battery indicator: Shows remaining battery life. Icon turns red when battery is crit-
ically low to indicate that the receiver should be plugged into a local power outlet right
away.
6. Recording countdown: Counts down until system recording starts.
7. Time & date stamp: The current date and time on the system.
8. Recording indicator: A red circle appears when recording is in progress. If viewing
and recording video from multiple cameras at once, the recording indicator will appear
above each video display where recording is enabled.
9. Volume indicator: Shows the current volume of the receiver. The volume indicator ap-
pears on screen when you change the volume using the

8.2 Navigating Menu Screen

Use the system menus to configure settings.
#LX400030; r.16602/16610; en-US
1 2
2014/0 8/18 17:14:18
7
), Quad Viewing (
4 5
8
), and Auto Sequence
/ keys.
16