Advertisement
Quick Links
IES618 Series
Industrial Ethernet Switch
User manual
Shenzhen 3onedata Technology Co., Ltd.
Tel: +86-755-26702668 Fax: +86-755-26703485
www.3onedata.com
【Summarize】
IES618 series is an industrial grade, managed and redundancy
Ethernet switch. The IES618 industrial Ethernet switches consists
of 8 Ethernet ports. The IES618-2F consists of 6 Ethernet ports
and 2 Fiber ports. The IES618-3F consists of 5 Ethernet ports and
3 Fiber ports. The IES618-4F consists of 4 Ethernet ports and 4
Fiber ports that provide an economical solution for your industrial
TM
Ethernet connection. SW-Ring
is designed as rapid redundancy
network arithmetic. It provided recover technology for fault of
rapid redundant network, the recovery time<20ms. The switch
support AC power input series and DC power input series
optional.
The switch accorded to CE, FCC standard and Industry grade 4
design requirement, support DC redundancy power or AC single
power input and 1 channel relay alarm output, and -40～75℃
working temperature, can meet all kinds of Industrial environment
requirement.
It
can use in power,
transportation area etc.
【Packing list】
The industrial Ethernet switch is shipped with the following items.
If any of these items are missing or damaged, please contact your
customer service representative for assistance.
Industrial Ethernet switch ⅹ 1
Documentation and software CD ⅹ 1
User manual ⅹ 1
DIN-Rail mounting kit ⅹ 1
Warranty card ⅹ 1
【Feature】
High performance network exchange technology
Support
IEEE802.3,
IEEE802.3u,
IEEE802.1Q, IEEE802.1p, IEEE802.1D, IEEE802.1W
SW-Ring ring network patent technology (Fault recovery
time<20ms）
- 1 -
Support RSTP, way exchange time<50ms
Support WEB, Telnet, CLI configuration
Support Port based VLAN and IEEE 802.1Q VLAN
Store and Forward switching process type
Support port status display, data update.
Support SNMP, IGMP Snooping
Support 8K MAC address
Support 2.0Gbps backboard bandwidth
DC power input series support redundancy power
supply(12～48VDC)
AC power input series support AC power supply(100～
240VAC/DC)
Support 1 channel relay alarm output
Reliable Industrial grade design
Industrial grade 4 design, -40-75℃work temperature
No fan deign
water
conservancy,
IP40 protection grade
DIN rail mount
【Panel layout】
Vertical view and bottom view
IEEE
802.3x,
Rear view
Advertisement
Related Manuals for 3onedata IES618-P
Summary of Contents for 3onedata IES618-P
-
Page 1: Packing List
Warranty card ⅹ 1 【Feature】 High performance network exchange technology Support IEEE802.3, IEEE802.3u, IEEE 802.3x, Shenzhen 3onedata Technology Co., Ltd. IEEE802.1Q, IEEE802.1p, IEEE802.1D, IEEE802.1W Tel: +86-755-26702668 Fax: +86-755-26703485 SW-Ring ring network patent technology (Fault recovery www.3onedata.com time<20ms） - 1 -... -
Page 2: Power Supply Input
Front panel view 11. Link/ACT LEDs The series of products size is the same, and the type of the 12. 10Base-T /100Base-TX Ethernet port Ethernet interface is different. Unit (mm) 13. 100Base-FX fiber port 【Power supply input】 DC Series Switch: The switch have redundant power input, provides one terminal block (4 bits) for PWR1 and PWR2 input. -
Page 3: Console Port
【Console port】 This series product provided 1pcs procedure test port based in serial port. It adopts RJ45 interface, located in top panel, can configure related command through RJ45 to DB9 female cable. 【LED Indicator】 LED indictor light on the front panel of product, the function of 10/100Base-T(X) MDI-X (Cross over cable) each LED is described in the table as below. -
Page 4: Specification
4. Power: DC series product support 12 ~ 48VDC power supply; 5. Cables should be straight in the hallways and turning; Transmit mode: store and forward AC series product support 100 ~ 240VAC/DC power supply; 6. Cable should be straight in the groove, and cannot beyond the System exchange bandwidth: 2.0G 5. - Page 5 IES618-P (12~48VDC): Size（W×H×D）: 53mm×138mm×110mm Unload consumption: 1.4W@12VDC Industry Standard Full load consumption: 3.5W@12VDC EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), Level 4 IES618-P (220VAC): EN61000-4-3 (RS), Level 3 Unload consumption:1.8W@220VAC EN61000-4-4 (EFT), Level 4 Full load consumption: 3.7W@220VAC EN61000-4-5 (Surge), Level 4 IES618-2F-P (12~48VDC):...