Agilent Technologies 1260 Infinity II User Manual page 64

3
Using the Module
Installing and Using Colunm ID Tags
Use these instructions to enter and store the column information on the
column ID tag.
1 In the Method and Run Control view of the Agilent OpenLAB CDS
2 Select a line in the table that contains column information as close as
Agilent OpenLAB A.02.02 SR2 ChemStation Edition provides a catalog of column types.
N O T E
Click the Catalog button to display a dialog box that allows you to choose how to load the
catalog into the table.
3 Click the Insert button to insert a line above the currently selected line, or
4 Click the Edit button to display a dialog box that allows you to edit the
5 Add or edit the other column-specific information (for example, maximum
6 If the column is installed and will be used in the Multicolumn Thermostat,
64
ChemStation Edition, select Columns from the Instrument menu.
The Edit Columns dialog box is displayed.
If the Edit Columns table is empty, go straight to Step 3.
Figure 9 The ChemStation Edit Columns table
possible to the column you are adding. The selected line acts as a template
for the new column.
the Append button to add a line to the end of the table.
The new line contains a copy of the information in the template line.
column-specific information such as Serial Number, Batch Number and
Description.
pressure, maximum temperature, length, diameter, particle size) in the Edit
Columns table.
select YES in the Installed column.
1260 Infinity II Multicolumn Thermostat User Manual