Table of Contents
Advertisement
USB 305 HSPA Modem User Guide
LED
Power
Data
18
State
Indicates
Off
Indicates one of the following states:
•
The modem is not inserted in the computer.
•
The computer is off or in "suspend and resume" mode.
•
The modem radio has been turned off using the connection management
software.
Solid Blue
The power is on, the modem is working normally.
Blinking Blue
The firmware is updating.
Do not remove the modem from the computer.
Blinking Amber The modem is searching for service (initializing).
Solid Amber
Modem error—either the modem is having a problem initializing (searching
for service) or is offline because of a failure.
Contact your service provider.
Off
The modem is unable to detect 2G or 3G service.
Blinking Amber The modem has detected a 2G network (EDGE, GPRS, GSM) and is ready to
connect.
Solid Amber
The modem is connected to a 2G network and is able to send and receive
data.
Blinking Blue
The modem has detected a 3G network (UMTS, HSPA) and is ready to
connect.
Solid Blue
The modem is connected to a 3G network and can send and receive data.
Removing a SIM card
Chapter
remove the SIM card from the USB 305 modem:
1.
2 provides instructions for inserting the SIM. To
Open the flap on the side of the modem and slide out the
SIM tray.
2131219
Advertisement
Table of Contents
