Ipv6 In Ipv4 Tunnel - D-Link AC1900 User Manual

Section 4 - Con guration
The user can con gure the IPv6 connection to run in IPv4 Tunnel mode. IPv6
over IPv4 tunnelling encapsulates IPv6 packets in IPv4 packets so that IPv6
packets can be sent over an IPv4 infrastructure.
Enter the IPv4 remote address you will use.
Remote IPv4
Address:
Enter the IPv6 remote address you will use.
Remote IPv6
Address:
Displays the current local IPv4 address.
Local IPv4
Address:
Enter the IPv6 local address you will use.
Local IPv6
Address:
Enter the subnet pre x length supplied by your ISP.
Subnet Pre x
Length:
IPv6 DNS Settings
Select either Obtain DNS server address automatically or Use the
DNS Type:
following DNS address.
If Use the following DNS address is selected:
Enter the primary DNS server address.
Primary DNS
Server:
Enter the secondary DNS server address.
Secondary DNS
Server:
D-Link DIR-878 User Manual

IPv6 in IPv4 Tunnel

49