Ipv6 In Ipv4 Tunnel - D-Link DIR-878 User Manual

Ac1900 high power wi-fi gigabit router

Hide thumbs Also See for DIR-878:

User manual (191 pages)

Quick installation manual (59 pages)

Quick install manual (25 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

Table of Contents

Section 3 - Configuration

You can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so that IPv6

packets can be sent over an IPv4 infrastructure.

Remote IPv4

Enter the Remote IPv4 address you will use.

Address:

Remote IPv6

Enter the Remote IPv6 address you will use.

Address:

Local IPv4

Displays the Local IPv4 address.

Address:

Local IPv6

Enter the Local IPv6 address you will use.

Address:

Subnet Prefix

Enter the Subnet Prefix Length supplied by your ISP.

Length:

DNS Type:

Select either Obtain DNS server address or Use the following DNS.

Primary DNS

If you selected Use the following DNS above, enter the Primary

Server:

DNS Server address.

Secondary DNS

If you selected Use the following DNS above, enter the Secondary

Server:

DNS Server address.

Enable DHCP-

Enable or disable prefix delegation services.

PD:

LAN IPv6

If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the

Address:

router.

LAN IPv6 Link-

Displays the router's LAN IPv6 Link-Local Address.

Local Address:

D-Link DIR-878 User Manual