D-Link AC1900 User Manual page 54

Section 4 - Con guration
LAN IPv6 Address Settings
Enable or disable prefix delegation services. This option is only
Enable DHCP-PD:
available if you selected Dynamic IP for address mode.
Displays the router's LAN link-local address.
LAN IPv6 Link-
Local Address:
If Enable DHCP-PD is disabled these additional parameters are available for
con guration:
If DHCP-PD disabled or static address mode is selected, enter the LAN
LAN IPv6 Address:
(local) IPv6 address for the router.
Displays the router's LAN link-local address.
LAN IPv6 Link-
Local Address:
Advanced Settings - Address Autocon guration Settings
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable Automatic
IPv6 Address
Assignment:
If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable or disable DHCP-PD for other IPv6 routers connected to the
Enable Automatic
LAN interface. Note: This feature requires a smaller subnet pre x than
DHCP-PD in LAN:
/64 (i.e. allowing for a larger address allocation), such as /63. Contact
your ISP for more information.
Select
Autocon guration
Type:
D-Link DIR-878 User Manual
IPv6 in IPv4 Tunnel (continued)
or Stateful DHCPv6.
50